Carc/Military

Solvent-Based:

B-875 Wash Primer
A wash primer with excellent spray characteristics that meets TT-C-490 Type III and MIL-P-15328D specifications.

N-8237A/B Wash Primer
A 2.5 VOC, HAPs-free, chromate-free wash primer designed to meet the performance of DOD-P-15328D.

XE-8802 Red Oxide Primer
A lead and chromate-free, corrosion inhibiting red oxide primer that exhibits, excellent early holdout even to strong solvents (ketones). Provides good color undertone to lead and chromate-free reds and oranges.

DynaMatchTM White Polyamide Epoxy Primer – N-1088A/B
A two-component, corrosion-inhibiting, polyamide epoxy primer suited for high performance application. Lead and chrome free. Meets the performance requirements of MIL-P-53022B Type I.

DynaSpec Primer – N-1981A/B
A two-component, corrosion-inhibiting, polyamide epoxy primer suited for high performance application. Lead and chrome free. Meets the performance requirements of MIL-P-53022B Type II.

XE-7156 Zinc Chromate Primer
A low moisture sensitive, corrosion inhibiting primer intended for application on surface-treated aluminum or surfaces coated with pretreatments MIL-C-8514 and DOD-P-15328. Meets the performance requirements of TT-P-1757A.

DynaSpec MC – N-8045 thru N-8048 & N-8507
An Aliphatic, single-component, HAPs-free, moisture cure CARC meeting MIL-C-53039A Type I. Intended uses: Provides visual and infrared camouflage to military vehicles and equipment. Resistant to chemical warfare and decontaminating materials.

Clear Silicone Alkyd Tint Base – N-7740
This is a low gloss silicone alkyd copolymer air-drying enamel. It is designed for use on primed metal, particularly on smooth exterior metal. It is highly weather-resistant and is characterized by excellent color and gloss retention. This product meets the specification for MIL-PRF-24635C.

N-5453A/B, N-5418A/B, N-5457A/B, N-6669A/B Lead and Chromate-Free Epoxy Topcoats
Two-component, lead and chromate-free polyamide epoxy topcoats suited for high performance applications. Meet the performance requirements of MIL-C-22750.

Heat Resistant Coating – N-2450, N-2702, N-4686, N-4717
Low gloss heat resistant coating. Meets MIL-P-14105C/MIL-P-14105D. Recommended uses to include exhaust systems.

Flame Control – TemperKote 1400H
Flame Control TemperKote 1400H Industrial Hi-Heat Coatings are based on 100% silicone resin with special ceramic colorants and additives.  The coating air dries within 30 minutes and can ship in the “air dry” state in 24 hours.  Avoid mechanical abrasion when in air dry state.  For optimum hardness a heat cure of 350F for one hour is needed, however no complex post heat curing is necessary.  TemperKote 1400H in the air dried state will cure when the coated equipment is placed in service.  Special pigments are utilized to achieve maximum heat resistant properties and color stability.
This coating is able to withstand severe thermal cycling to 1400F and can be applied directly to clean steel.  It has the unique ability to be handled in the air dry state.  It has good color stability to 1000F; Black to 1400F, excellent heat resistant properties, excellent weathering characteristics and good corrosion protection.

Water-Based:

DynaSpec H20 – N-7303A thru N-7306A/H20B
A water reducible, two-component CARC meeting MIL-DTL-64159 Type I.

DynaSpec H20 – N-8055A, N-8066A thru N-8068A/H20B
A water-reducible, two-component CARC meeting MIL-DTL-64159 Type II. Intended uses: provides visual and infrared camouflage to military vehicles and equipment. Resistant to chemical warfare agents and decontaminating materials. Compared to previous CARC topcoats, it provides superior weather and mar resistance.

Top